Can I Use Alcohol To Clean Printhead Epson

Maintenance and Transportation

Cleaning the Printer

If y'all have not used your printer for a long fourth dimension

To keep your printer working at its all-time, clean it thoroughly several times a twelvemonth.

Warning:

Exist careful non to bear on the gears within the printer.

Caution:

Never use alcohol or thinners to clean the printer; these chemicals tin can damage the components likewise as the example.

Exist careful not to get water on the printer machinery or electronic components.

Practise not utilise a hard or annoying brush.

Do not spray the inside of the printer with lubricants; unsuitable oils tin can damage the machinery. Contact Epson if you think lubrication is needed. See Contacting Customer Support.

Make sure the printer is turned off and all the lights are off, so unplug the ability cord and disconnect the printer from your computer.

Wait a few minutes, then open the height encompass and apply a soft, make clean fabric to carefully remove any dust or dirt inside the printer. If there is a large amount of dust, or if at that place is ink on the newspaper path, use a soft, clean cloth dampened with mild detergent. So wipe the inside of the printer dry out with a dry out, soft, clean fabric.

If the dorsum of printouts are soiled with ink, carefuly clean the platen (the grayness part) with a soft, clean fabric.

If powdery grit is trapped in the platen, remove information technology carefully with a toothpick or like object.

Close the top cover.

If the outer instance is muddied, make clean it using a soft, clean cloth dampened with mild detergent. Keep the ink compartment covers closed to foreclose h2o from getting inside.

If you have not used your printer for a long fourth dimension

If you have not used your printer for a long fourth dimension, the print head nozzles may go clogged. Perform a nozzle check and clean the print head.

To perform a nozzle check using the command panel, come across Checking the print caput nozzles.

To perform a nozzle check using the printer software, run into Checking the impress head nozzles for Windows or Checking the print head nozzles for Mac Os X.

To clean the print head using the control panel, press the Bill of fare push button for more than 3 seconds.

To clean the print caput using the printer software, see Cleaning the print caput for Windows or Cleaning the print head for Mac OS X.

If you have not used your printer for more than than six months, the printer requires head cleaning. If PERFORM Power CLEANING? appears on the LCD when you turn on the printer, select Y, then press the Menu button to start caput cleaning.

If you want to perform caput cleaning later, select N.

Note:

If you select Y to first head cleaning, follow the letters on the LCD and move the ink levers when instructed.

Fifty-fifty if you will not be using your printer for a long fourth dimension, leave the ink cartridges installed.

[Summit]

Version NPD1123-00, Copyright © 2005, SEIKO EPSON CORPORATION

Source: https://files.support.epson.com/htmldocs/pro48u/pro48urf/trans_5.htm

Posted by: clementseciou1967.blogspot.com

Share this post